Blog Archives

One Piece Dual Flush Toilet – Info

Bruce Thompson was the inventor from the Dual Flush toilet in 1980. This orginated around australia within the Caroma toilet company. These initially were built with a Duoset cistern that sitting in the center of the tank. This had two buttons on top, one for half flush (liquid waste) and something for full flush (solid waste). This saved a typical household as much as 67% water usage. The half flush feature requires less water to use and therefore lacks the siphoning energy from the full flush feature. The half flush consumes .8 gallons water and also the full flush consumes 1.6 gallons water. Read more »

Is It Time to Kill Off the Flush Toilet ?

To purge or otherwise to purge. Which was the question that designers and ecologists were asking one another now as 100s of individuals who spend considerable time considering this stuff  organised for that annual World Toilet Summit and Expo in Macau.

The Planet Toilet Summit and Expo is much like the Star Trek Convention from the waste management and sanitation world. Toilets on show vary wildly from the card board box including a hole, plastic bag and pouch of waterless miracle virus-busting dust ($50), to some high-tech ‘uber-toilet,’ featuring an in-chair warmer/cooler, men and women water jets, an in-bowl light (why? why?) and usb port spot to help you connect your music player for the soothing tune of preference ($1,200).

But determining how you can wean the planet from the flush handle required center stage. Although the common flush toilet has continued to Read more »

Flush Toilet

A typical flush toilet is a vitreous ceramic bowl containing water plus special plumbing made to be rapidly filled with more water. The back of the toilet bowl is connected to a hollow drain pipe shaped like a upside down U connecting the drain from the bowl to a hollow siphon tube longer than the water in the bowl is high. The siphon tube connects to the drain. The bottom of the upside down U shaped drain pipe limits the height of the water in the bowl before it flows down the drain. If water is poured slowly into the toilet bowl it simply flows down the drain–the toilet does not flush. The water in the bowl both acts as a barrier to sewer gas entering and as a receptacle for waste. Sewer gas is vented though a vent pipe attached to the sewer line. At the top of the toilet bowl is a rim built into the toilet with many slanted drain holes connected to the toilet tank to fill, rinse and induce swirling in the toilet bowl when it is flushed. Mounted above the toilet is a large holding tank with about (now) 1.6 US gallons (6.1 L) to 1.2 US gallons (4.5 L) of water. This tank is built with a large drain 2.0 inches (5.1 cm) to 3.0 inches (7.6 cm) diameter Read more »

Profile Wise Dual Flush Toilet Saves Water

This is a toilet that utilizes eco-friendly living abilities towards the best. The bathroom . has a sink on top with a faucet. If you clean both hands, water could be saved for eliminating. It might really save 17% water inside a neat and easy manner.

However, these toilets can be found only around australia right now and could be available elsewhere sometime later. It’s known as the Profile Wise Dual Flush Toilet and it has been released by Caroma, the industry famous and quality leader of toilet items including high quality toilet suites, urinals and classy sinks.

It’s an amazingly intriguing and clever concept which may do well for those who waste lots of water. The fixture also looks petty stylish and also the user can specify the dimensions. There’s no details about the cost and as it is obtainable in just Australia, we shall need to watch for sometime to be able to have the ability to save water by doing this.